Replacement 62 Guitar Neck for Tele, Veneer Rosewood Board, No Finish, 21 Frets Replacement 62 Guitar Neck for Tele, Veneer Rosewood Board, No Finish, 21 Frets
Replacement 62 Guitar Neck for Tele, Veneer Rosewood Board, No Finish, 21 Frets, Full Replacement 62 Guitar Neck for Tele, Veneer Rosewood Board, No Finish, 21 Frets, Full
Replacement 62 Guitar Neck for Tele, Veneer Rosewood Board, No Finish, 21 Frets, Back Replacement 62 Guitar Neck for Tele, Veneer Rosewood Board, No Finish, 21 Frets, Back
Replacement 62 Guitar Neck for Tele, Veneer Rosewood Board, No Finish, 21 Frets, Angled Heel Replacement 62 Guitar Neck for Tele, Veneer Rosewood Board, No Finish, 21 Frets, Angled Heel
Replacement 62 Guitar Neck for Tele, Veneer Rosewood Board, No Finish, 21 Frets, Heel Replacement 62 Guitar Neck for Tele, Veneer Rosewood Board, No Finish, 21 Frets, Heel
Replacement 62 Guitar Neck for Tele, Veneer Rosewood Board, No Finish, 21 Frets
Replacement 62 Guitar Neck for Tele, Veneer Rosewood Board, No Finish, 21 Frets, Full
Replacement 62 Guitar Neck for Tele, Veneer Rosewood Board, No Finish, 21 Frets, Back
Replacement 62 Guitar Neck for Tele, Veneer Rosewood Board, No Finish, 21 Frets, Angled Heel
Replacement 62 Guitar Neck for Tele, Veneer Rosewood Board, No Finish, 21 Frets, Heel

Replacement 62 Guitar Neck for Tele, Veneer Rosewood Board, No Finish, 21 Frets

£199.00
Tax included.
TRO-62

Replacement 62 Guitar Neck for Tele, Veneer Rosewood Board, No Finish, 21 Frets

The TRO-62 replacement neck for Telecaster® is “officially licensed by Fender®” and made to exacting quality standards in Japan.  Staying true to Fender's® 1962 spec, our TRO-62 offers a pre-radiused neck with veneered rosewood fretboard.  Unlike traditional "slab cut" fretboards, the TRO-62 offers a "lam cut" fretboard giving more surface contact between neck and fretboard adding a stronger joint for a stiffer and more stable neck.  With it's vintage frets and 7.25" fretboard radius, this neck is a true throwback from the golden era of rock n' roll!  Unfinished and ready to spray, you can finish the TRO-62 any way you'd like!

Specifications

  • Scale Length: 25.5
  • Neck Profile Shape: C
  • Frets: Tall 0.079" x 0.043" (2.00mm x 1.09mm) 
  • Wood: Maple with veneered rosewood fretboard
  • Finish: None/Unfinished
  • Fretboard Radius:  7.25" 
  • Inlays: White fretboard and side marker dots
  • Nut Width: 1-5/8" (41.2mm)
  • Heel Width: 2-3/16" (55.5mm)
  • Heel Shape: Square
  • Tuning Peg Holes: Vintage 2-step hole
    • 0.34" (8.5mm) bushing-hole diameter
    • 0.25" (6.5mm) post-hole diameter
  • Truss Rod Adjustment Location: Heel
  • Neck Thickness:
    • 0.85" (21.6mm) at first fret
    • 0.96" (24.4mm) at twelfth fret

Important Notes

  • Wood grain varies from neck to neck.  Your neck may differ slightly from what is pictured.
  • All necks have a limited lifetime warranty against defects in materials and workmanship.
  • All necks may require fret leveling and polish.  This is normal and not a defect.
  • To protect against the effects of moisture, we recommend sealing unfinished necks prior to installation.
  • This neck is licensed to Allparts Music Corporation by Fender ® Musical Instruments under a quality control trademark license.  Allparts Music Corporation is not affiliated with Fender ® and no Fender ® warranty applies.